BRONZE NOZZLES
CALL FOR PRICING!
FROTHY
NOZZLE
Best Seller!
This popular nozzle produces a thick, foaming geyser of water. Creates an eye catching column of spray and is often used in multiple nozzles, each at a different height for a dramatic display. Due to air being mixed with water at the nozzle, it is important that the water in the pool stays at a constant level. Available in 1", 2" and 3" inlet sizes.
| Part # | Inlet Size | Price |
| FN1 | 1" | ** |
| FN2 | 2" | ** |
| FN3 | 3" | ** |
| Spray Height | ||||||||
| 2' | 4' | 8' | 12' | |||||
| Part # | GPM | Head | GPM | Head | GPM | Head | GPM | Head |
| FN1 | 16 | 12' | 22 | 20' | - | - | - | - |
| FN2 | - | - | 44 | 15' | 63 | 35' | 73 | 45' |
| FN3 | - | - | - | - | 97 | 37' | 120 | 50' |
EasyPro's line of bronze nozzles are designed for use in architectural fountains and pools. These nozzles are solid cast bronze and cost a fraction of other similar nozzles. Next to the GPM figure listed is the amount of head pressure created by the nozzle. The pump used will need to deliver the GPM shown at the foot of head shown.
TWO
TIER NOZZLE
A decorative spray offering a lower umbrella spray along with a tall center geyser. Available in 1" or 2" diameter nozzles. The 1" is recommended in small areas where minimal noise is desired. The 2" is recommended in large ponds due to the high volume of water being pumped.
| Part # | Inlet Size | Price |
| 2TN1 | 1" | ** |
| 2TN2 | 2" | ** |
| Spray Height | ||||||||
| 2' | 4' | 6' | 8' | |||||
| Part # | GPM | Head | GPM | Head | GPM | Head | GPM | Head |
| 2TN1 | 3 | 4' | 4 | 5' | 5 | 6' | 7 | 6' |
| 2TN2 | 6 | 5' | 7 | 6' | 9 | 7' | 13 | 8' |
THREE
TIER NOZZLE
The most popular spray patter we offer, the three tier pattern is a great choice since the multiple tiers of water provide a full, thick looking spray. Available in 3/4" and 1-1/2" inlet sizes.
| Part # | Inlet Size | Price |
| 3TN1 | 3/4" | ** |
| 3TN2 | 1-1/2" | ** |
| Spray Height | ||||||||
| 4' | 6' | 8' | 10' | |||||
| Part # | GPM | Head | GPM | Head | GPM | Head | GPM | Head |
| 3TN1 | 14 | 6' | 22 | 8' | 24 | 10' | - | - |
| 3TN2 | - | - | 40 | 12' | 52 | 18' | 69 | 26' |
SMOOTH
JET NOZZLE
These individual nozzles can be used in multiples to create spray rings, fountains or arching jets of water. Each nozzle produces a smooth, continuous stream of water.
| Part # | Inlet Size | Price |
| SJN37 | 3/8" | ** |
| SJN75 | 3/4" | ** |
| Spray Height | ||||||||
| 2' | 3' | 4' | 5' | |||||
| Part # | GPM | Head | GPM | Head | GPM | Head | GPM | Head |
| SJN37 | 3 | 4' | 4 | 5' | 5 | 6' | 7 | 6' |
| SJN75 | 6 | 5' | 7 | 6' | 9 | 7' | 13 | 8' |
WATERBELL
NOZZLE
This nozzle is a favorite in areas where the sight of water is desired without a lot of sound. The solid sheet of water makes minimal splash. Ideal for hotel lobbies, office buildings and other indoor areas. Bronze nozzle is available in 1-1/2" inlet size only.
| Part # | Inlet Size | Price |
| WB15 | 1-1/2" | ** |
| Spray Diameter | ||||
| 18' | 36' | |||
| Part # | GPM | Head | GPM | Head |
| WB15 | 20 | 5' | 40 | 5' |
FAN
JET NOZZLE
The fan jet nozzle produces a solid fan shaped spray. Ideal when used at a 45° angle around the perimeter of a pool or fountain. Best used in a wind-free area to maintain spray pattern. Looks best when used in multiples. Available in 1" inlet only.
| Part # | Inlet Size | Price |
| FJ1 | 1" | ** |
| Spray Height | ||||||
| 2' | 4' | 6' | ||||
| Part # | GPM | Head | GPM | Head | GPM | Head |
| FJ1 | 15 | 3' | 25 | 6' | 30 | 8' |
