|
HEATERS
HEATING TIP: It takes 1000 watts to heat 250
gallons of water 10°.
QUICKPLUG
ONE STEP HEATER SYSTEM
Clepco's submersible heater system includes a low liquid shut
off float for added protection.
The Sea Cure™ metal is not corroded by
saltwater and also resists chloride or ammonia damage. This special
stainless steel was developed as a corrosion resistant alternative to titanium.
Heaters must be used with GFI protection.
QuickPlug heaters are easy to
install! The submersible heater lays on the pond bottom and is connected
to the digital controller via a 20' power cord. Controller is mounted on
shore.
| Part # |
Description |
Volts |
Heater
Length |
Ship
Weight |
Price |
| SUB10 |
1000 watt heater |
120 |
11" |
12 lbs. |
** |
| SUB15 |
1500 watt heater |
120 |
16" |
18 lbs. |
** |
| SUB25 |
2500 watt heater |
240 |
21" |
21 lbs. |
** |
| SUB30 |
3000 watt heater |
240 |
29" |
24 lbs. |
** |
** Call for pricing!
Bayonet Heaters
Single Tube
These heavy duty, single tube, single phase heaters are UL
listed and American made. Choose from 304 stainless steel for
freshwater use or titanium for saltwater use. Ideal for use in
recirculating systems and other applications where automatically
controlled temperatures are needed. Each of these heaters
requires an appropriate sized controller to operate (see
below). Heaters have high temperature fuse protection which
automatically shuts heater down if water level drops too low.
Fuses must be replaced after shutdown occurs. Be sure to keep a
spare fuse on hand!
*
3-Phase heaters available.
|
|
Freshwater
(Stainless Steel) |
Saltwater
(Titanium) |
|
Watts |
Volts |
Ship Weight (lbs.) |
Part # |
Price |
Part # |
Price |
| 1000 |
120 |
5 |
WS1107 |
** |
TY1107 |
** |
| 1000 |
240 |
5 |
WS1207 |
** |
TY1207 |
** |
| 2000 |
120 |
9 |
WS2109 |
** |
TY2109 |
** |
| 2000 |
240 |
9 |
WS2209 |
** |
TY2209 |
** |
| 3000 |
240 |
11 |
WS3214 |
** |
TY3214 |
** |
| 4000 |
240 |
13 |
WS4218 |
** |
TY4218 |
** |
| 5000 |
240 |
16 |
WS5225 |
** |
TY5225 |
** |
| 6000 |
240 |
17 |
WS6228 |
** |
TY6228 |
** |
|
Dimensions |
|
Part # |
Length |
Cold Zone |
Hot Zone |
| WS1107 / TY1107 |
11" |
4" |
7" |
| WS1207 / TY1207 |
11" |
4" |
7" |
| WS2109 / TY2109 |
17" |
7" |
10" |
| WS2209 / TY2209 |
17" |
7" |
10" |
| WS3214 / TY3214 |
21" |
7" |
14" |
| WS4218 / TY4218 |
28" |
9" |
19" |
| WS5225 / TY5225 |
35" |
10" |
25" |
| WS6228 / TY6228 |
38" |
10" |
28" |
Spare Fuse: PART
#: WS10 - Be sure to keep a spare fuse on hand.
**
Call For Pricing
Quick Plug Heaters
These Clepco quality heaters are great for portable
applications! Unlike the heaters above which need to be hard
wired into place, these heaters feature a special mating plug
which allows the heater to "Quick Plug" to the controller. The
controller has a standard 115 volt plug, which connects to your
outlet. Simple and easy! Each Quick Plug heater is fused for
protection against overheating (in case of low water). Available
in both stainless steel (fresh water) or titanium (salt water).
Package includes heater, controller with 6' power cord (115
volt units) and EZ clip mounting bracket.
One
year warranty.
|
Part # |
Description |
Volts |
Length |
Hot Zone |
Ship Wt |
Price |
| QWS500 |
500 W, Stainless |
120 |
11" |
7" |
9 lbs. |
** |
| QWS1000 |
1000 W, Stainless |
120 |
11" |
7" |
10 lbs. |
** |
| QWS1800 |
1800 W, Stainless |
120 |
17" |
10" |
12 lbs. |
** |
| QWS2500 |
2500 W, Stainless |
240 |
22" |
14" |
13 lbs. |
** |
| QWS3500 |
3500 W, Stainless |
240 |
29" |
19" |
15 lbs. |
** |
**
Call For Pricing |
|
