Aquamaster fountains are a beautiful addition to any water feature.  This 1/2 HP fountain is ideal for small ponds and features needing improved oxygen, increased circulation and an aesthetic appeal.

1/2 HP Lakewood Nozzle (comes standard) 6.5' tall x 16' diameter

Optional Crown & Geyser Nozzle 7' tall x 24' diameter

Optional Wide Geyser Nozzle 11' tall x 5' diameter

• Includes motor, float, Lakewood spray pattern, first 50' of power cable, control panel with GFI, timer and overload protection

• Two optional nozzles also available (see pictures below)

• Two year warranty on unit, one year warranty on control panel

• UL and cUL listed

• Includes underwater quick disconnect on power cable

• Stainless steel propeller and motor housing

Add lights below for a beautiful night time display!

An Aquamaster floating fountain is even more dramatic at night with the addition of a Night Glow Lighting System.  Available with 75, 150 or 250 watt fixtures for beautiful displays.

• All lights operate at line voltage (115v) - no transformer needed

• All kits include stainless steel housings

• All necessary electrical controls installed in fountain control panel including timer; GFI protection is standard, optional sequencer photo cell also available

• Power cable with quick disconnect is included

• First 50' of #14 power cable included (see chart below for maximum #14 distance, longer distances require #12 or #10 cable)

• Colored lens available, price shown is upgrade charge from clear to color lens

• Three year warranty

 

 

MASTER SERIES FOUNTAINS 1-10 HP

Crown & Geyser

Crystal Geyser

Medinah

Valhalla

Wide Geyser

 

Step One:  Select Correct Motor Size

All AquaMaster fountains are sized by HP rating of motors.  Larger motors produce higher/wider fountain patterns.  Select the HP you need to achieve the size spray pattern desired.  See spray pattern dimensions below for each nozzle available.  These dimensions will assist you in selecting the size motor needed. 
All 1 - 5 HP fountains include:

• Motor, float, control panel (with timer and GFI) and intake screen

• First 50' of power cable* and quick disconnect, upsized cable will increase price

• Five year warranty on 1 - 5 HP, three year warranty on 7.5 - 10 HP, one year warranty on control panels

All motors available in 208-240 volt single phase or 208-240 volt and 440-480 volt three phase power, all include GFI protection.

 

*7.5 and 10 HP fountain kits include the first 100' of power cable

Step Two:  Order Power Cable
All single and three phase fountains use the same four connector power cable.  The longer the cable, the heavier the gauge (diameter) is needed to prevent voltage loss and motor damage.

• The first 50' of cable is included in motor price above for 1 - 5 HP units, the first 100' is included for the 7.5 and 10 HP units.  If no additional cable is needed, skip to step three.  If longer cable is needed, please use the chart below to determine additional cable.

Please measure carefully before ordering power cable!  Factor in depth of pond (cord goes down from fountain and always lays along the bottom) and distance of power supply from pond's edge into total length needed.  Always order a little extra to allow for movement of the fountain after installation.

Step Three:  Select Spray Nozzle
All AquaMaster fountains produce the Lake wood display without the use of any nozzle.  If additional displays are desired, select from these options.  These are the most popular nozzles that are available, if you desire a nozzle not shown please contact your Stoney Creek representative for all options offered by AquaMaster.

Copyright 2006. Stoney Creek Fisheries & Equipment Inc. All rights reserved.               ** This website is for informational purposes only.  All prices are subject to change.**